News

Current location：Home >> News

  • Maintenance method of air compressor

    20-03-17
    　　1、 Regular maintenance and repair of main components: in order to ensure the normal and reliable operation of the air compressor and the service life of the unit, a detailed maintenance plan shall be formulated, and regular operation, maintenance and inspection shall be carried out to keep the air compressor unit clean, oil-free and dirt ···

  • Control method of oil temperature of air compresso···

    20-03-17
    　　The change of air compressor hollow compressor oil (lubricating oil) temperature will have a certain impact on the lubricating effect of air compressor oil (lubricating oil), thus affecting the normal operation and service life of the equipment. There are 7 5L-40 / 8 air compressors produced by Wuxi compressor factory in the air compresso···

  • Management method of air compressor room

    20-03-17
    　　1. A wide and well lit place shall be selected to facilitate the space and lighting required for the operation, maintenance and repair of the air compressor.　　2. The ground in the air compressor room must be flat and hard (general cement floor is OK), and attention should be paid to keep the ground clean and free of sundries, especially i···

  • The function and method of cleaning the main machi···

    20-03-17
    　　The function and method of cleaning air compressor head　　Effect:　　The air compressor has been used for a long time, and there will be oil scale, carbon deposit, sediment and rust inside. In addition, the air compressor with different brands of engine oil will also have black rubber similar to asphalt. Therefore, it is necessary to use clean···

  • Problems in operation of piston air compressor

    20-03-17
    　　The operating personnel of piston air compressor must pay attention to the operation of the machine, carry out patrol inspection frequently, find out the fault and remove it in time. And make necessary adjustment according to the instrument indication and working requirements. In general, pay attention to the following problems:　　I. lubri···

  • Installation requirements of air compressor

    20-03-17
    　　1. Environment and ventilation requirements　　1) Air compressor to produce a lot of heat, for this reason, screw air compressor must be placed in a room with enough ventilation.　　2) To facilitate maintenance, a space of 0.9m is required around the air compressor, and a clear space of 1.1m must be reserved in front of the control panel. It is···

  • Characteristic analysis of screw oil

    20-03-17
    　　From the point of view of lubrication, the oil injected internal cooling compressor is the most widely used type at present. In this kind of air compressor, the lubricating oil is pressed into the air compressor by the oil pump to lubricate the bearings and screws respectively. The lubricating oil is directly injected into the air compres···

  • Analysis of overheat of screw air compressor

    20-03-17
    　　Analysis of overheat of screw air compressor　　Fault phenomenon:　　1. Air compressor exhaust temperature is too high.　　2. Hot running parts.　　Cause of failure:　　1. The air compressor does not rest because the pressure release valve or unloading valve does not work.　　2. Serious leakage of air brake system causes no rest of air compressor.　　3. In···

Common38Sstrip Current3/5PageHomePrevious12345Next Tail page